As an Amazon Associate I earn from qualifying purchases.
ETEKJOY #ad - No software provided. It doesn't work for other frequencies. Read/write speed up to 424 kbps. You have to get a third-party application/software to work with it by yourself.
If you are not familiar with it, don't buy. Pcsc compliant. Support iso 14443 type a and b, mifare, feliCa, and all 4 types of NFC ISO/IEC 18092 tags.
ACS #ad - 5 pcs ntag213 nfc tag samples and 2 pcs UID MF1 card. Provide sdk and free nfc tool software. Iec14443a and iso18092 protocol compliance. Acr122u nfc reader writer. 13. 56 mhh support mifare 1k, ntag213, Mifare plus, ultralight /ultralightc, Mifare desfire.
SYWAN #ad - Double-click to open the software, and clik the Start on your screen. Note: the software of our machine is only compatible with windows system, em4305, but not all. When it shows deconding is succcessful, then press WRITE to copy it. How to copy an unencrypted card: 1. Inserted batteries and powered on 2.
Press“ok” when a disclaimer pops up 3. Inserted card into back elastic 4. Press scan or READ 5. Replace a blank with same frequency of the card you want to copy 6. Press wTIRE. Support read: em4100/em4200, mifare classic, it may work for most half-encrypted cards, 1386/1326/1346; Support cards write: 1386/1326/1346, Ntag203, T5577, NOT working with MAC system or Linux system; It doesn't work for fully-encrypted cards.
Enter my computer, it shows usb connecting, replace a blank card, Find the removable disk and copy software exe that with RED Logo to another flash drive of your PC. What you will get: 1 read machine, 10*ic key, 1 usb cable, 10*id 125khz Keyfob, 10*ID 125khz Card. To decode a encryption card, you need to connect to a pc: when connect with pc:there is a disclaimer at this time, do not press the "ok" button or any button on the Reader machine. It will take about 1-3 minutes.
ACS #ad - Supports iso 14443, mifare, felica, and all 4 types of NFC ISO/IEC 18092 tags. Nfc support: nfc reader/writer mode, Peer-to-Peer Mode, Card Emulation Mode. Usb 2. 0 full speed Interface.
SYWAN #ad - It supports almost all blank copy cards, including uid, cuid, e5550, el8265, em4305, 7200, fuid, 5200, 8200, Icuid, E5500, zxuid, t5577, euid, 6200, Some Cuid Cards. Supported ic, s50, mf1, hid37, id, hid26, hid35, 125khz-13.
56mhz; and please note that some chip type are not writable, TK4100, for example : IC MF1 S50 TK4100 EM4100 etc. But the operation is more complicated, And It Needs To Go To The Access Control Card Reader For Detection.
The operation is more recommended, and it supports writing encrypted ic Cards Into Most Android Nfc Mobile Phones. Supports iC Frequency: 13. 56mhz. The machine only supports id frequency: 125khz, 175khz, 250khz, 375khz, 500khz, etc. Support some encryption cards of t5577 this is a huge technical update, other machines On The Market Cannot Sit At Present.
HENA #ad - 3. Lightweight and easy to use: aBS flame retardant material shell, small size and thin, high-quality microchip control inside, fast card reading effect. Can read/write/copy/decode/delete most of 125KHz and 13.
56mhz rfid cards. Efficient high-speed usb: 1. 2 meters 4 feet length usb transmission line connected to the device, no need to install a driver, respond immediately, quickly read the card number.5. Led warning light / buzzer: the led reminder light is red in standby mode, the green light is in card reading status, and a built-in buzzer is provided for convenient and effective reminders.
Yosoo #ad - Thus, acr122u can also read and write more quickly and efficiently. The acr122u nfc reader is ideal for both secure identity verification and online micro-payment transactions. In order to increase the security level, such as pos terminals, permitting easy integration into bigger machines, ACR122U can be integrated with an ISO 7816-3 SAM slot.
The proximity operating distance of acR122U is up to 5 cm, it is a plug-and-play USB device allowing interoperability with different devices and applications. Application network access control micro-payment NFC mobile tag Public transportation terminals Automatic fare collection Physical access control Customer loyalty Time and attendance Contactless public phones Vending machines.
Ccid-compliant pc/sc-compliant read/write speed up to 424 kbps built-in antenna for contactless tag access, with card reading distance of up to 50 mm depending on tag type Supports ISO 14443 Type A and B, and all 4 types of nfc iso/IEC 18092 tags Supports new Ultralight C via pseudo APDUs and Plus SL1 4 Byte UID, felica,, via pseudo APDUS and SL3. With an access speed of up to 424 kbps and a full USB speed of up to 12 Mbps, depending on the type of contactless tag in use.
Yosoo Health Gear #ad - High speed: this nfc reader writer has high Read / write speed of up to 424 kbps. You need applications provided by third parties. Note: this nfc reader writer does not come with any software.
Contactless intelligent reader writer: this Contactless Smart Card Reader adopts Integrated antenna for contactless tag access with card reading distance of up to 50 mm depending on the day. Application: this nfc reader supports iso 14443 type a and b, felica and all 4 types of nfc iso / iec 18092 markings; Supports new Ultralight C via pseudo APDUs and Plus SL1 4-byte UID over pseudo APDUS and SL3.
CDIYTOOL #ad - Compatible with: cards that support reading: ic, em4305, el8265, fuld, hid26, mf1, icuid, id, tk4100, hid35, s50, s70, sid32; blank copy cards that support writing: uid, EM4100, GID64, t5577, HID37, gid32, 5200.
Support frequency: id-125khz, id-250khz, id-300khz, id-375khz, id-175khz, ID-500KHz etc. Waterproof & Durable.
Lexi #ad - Usb full speed efficient1. 2 meters long usb transmission line connected to the device, respond immediately, no need to install a driver, quickly read the card number.
Working frequency125khz / 13. 56 mhz, support ic / ID dual frequency replication. Obtain the software when you connect this product to a computer, you can find the software on the computer. Led warning light / buzzerthe led reminder light is red in standby mode, the green light is in card reading status, and a built-in buzzer is provided for convenient and effective reminders.
1. ETEKJOY
#adSDK, ETEKJOY ACR122U NFC RFID 13.56MHz Contactless Smart Card Reader Writer w/USB Cable, 5X Writable IC Card No Software
#adIf you are not familiar with it, don't buy. Pcsc compliant. Support iso 14443 type a and b, mifare, feliCa, and all 4 types of NFC ISO/IEC 18092 tags.
More information #ad
It is professional hardware. Frequency: 13. 56mhz. Ccid standard. Support new mifare ultralight c via pseudo apdus and Mifare Plus SL1 4 Byte UID, via pseudo APDUS and SL3. It works for frequency 13. 56mhz only. Card reading distance of up to 50 mm depending on tag type. Usb interface. 1. 2.| Brand | ETEKJOY #ad |
| Manufacturer | ETEKJOY #ad |
| Weight | 0.22 Pounds |
| Part Number | ACR122U-A9 |
| Model | NA |
More information #ad
2. ACS
#adACR122U NFC Reader Writer + 5 PCS Ntag213 NFC Tag + Free Software
#adMore information #ad
| Brand | ACS #ad |
| Manufacturer | ACS #ad |
| Height | 0.5 Inches |
| Length | 3.54 Inches |
| Width | 2.56 Inches |
| Part Number | ACR122U |
| Model | ACR122U |
More information #ad
3. SYWAN
#adSYWAN English 10 Frequency NFC RFID Reader Copier Writer Duplicator for IC ID Cards and All 125kHz Cards,10 Pcs ID 125khz Cards + 10pcs ID 125kh Key Fobs + 10pcs 13.56mhz IC Key Fobs + 1 USB
#adPress“ok” when a disclaimer pops up 3. Inserted card into back elastic 4. Press scan or READ 5. Replace a blank with same frequency of the card you want to copy 6. Press wTIRE. Support read: em4100/em4200, mifare classic, it may work for most half-encrypted cards, 1386/1326/1346; Support cards write: 1386/1326/1346, Ntag203, T5577, NOT working with MAC system or Linux system; It doesn't work for fully-encrypted cards.
More information #ad
Support 10 frequency: id-125khz, ic13. 56mhz iso1443a/b, id-250khz, id-750khz, id-1000khz, id-625khz, id-875khz, id-500khz, ID-375KHz, HID125kHz Prox cards. Enter my computer, it shows usb connecting, replace a blank card, Find the removable disk and copy software exe that with RED Logo to another flash drive of your PC. What you will get: 1 read machine, 10*ic key, 1 usb cable, 10*id 125khz Keyfob, 10*ID 125khz Card. To decode a encryption card, you need to connect to a pc: when connect with pc:there is a disclaimer at this time, do not press the "ok" button or any button on the Reader machine. It will take about 1-3 minutes.
| Brand | SYWAN #ad |
| Manufacturer | Big waves #ad |
| Part Number | NFC-012 |
More information #ad
4. ACS
#adACR1252U USB NFC Reader III
#adMore information #ad
| Brand | ACS #ad |
| Manufacturer | ACS #ad |
| Height | 1.1 Inches |
| Length | 8 Inches |
| Width | 3.6 Inches |
| Part Number | 4260313683246 |
| Model | 4260313683246 |
More information #ad
5. SYWAN
#adNFC Smart Card Reader Writer RFID Copier, English Version iCopy X100 NFC ID IC Reader Writer+10pcs 125khz Cards+10pcs ID 125khz Keyfobs+10pcs 13.56MHz IC Key, NFC RFID Card Copier Reader Writer
#ad56mhz; and please note that some chip type are not writable, TK4100, for example : IC MF1 S50 TK4100 EM4100 etc. But the operation is more complicated, And It Needs To Go To The Access Control Card Reader For Detection.
More information #ad
Standalone nfc simulation function let mobile phones, bracelets and other devices with nfc function simulate encrypted ic cards with one key, and easily realize the card-free when going out. The operation is more recommended, and it supports writing encrypted ic Cards Into Most Android Nfc Mobile Phones. Supports iC Frequency: 13. 56mhz. The machine only supports id frequency: 125khz, 175khz, 250khz, 375khz, 500khz, etc. Support some encryption cards of t5577 this is a huge technical update, other machines On The Market Cannot Sit At Present.
| Brand | SYWAN #ad |
| Manufacturer | Big waves #ad |
| Part Number | 0914-01 |
More information #ad
6. HENA
#adNFC Reader, 125KHz Card Duplicator, with USB and UID T5577 Writable Key Fobs Cards, 13.56MHz Encrypted Card Decoder, HENA HERNAS RFID Reader Writer, Smart Card Copier, Black ns106+5+5
#ad56mhz rfid cards. Efficient high-speed usb: 1. 2 meters 4 feet length usb transmission line connected to the device, no need to install a driver, respond immediately, quickly read the card number.5. Led warning light / buzzer: the led reminder light is red in standby mode, the green light is in card reading status, and a built-in buzzer is provided for convenient and effective reminders.
More information #ad
2. Working frequency: 125khz / 13. 56 mhz, support ic / id dual frequency replication. 1. Obtain the software: when you connect this product to a computer, you can find the software on the computer. If it doesn't displayed on your computer, you can also ask me for the software link. 4.| Brand | HENA #ad |
| Manufacturer | HENA #ad |
| Height | 0.5 Inches |
| Length | 4.2 Inches |
| Weight | 0.3 Pounds |
| Width | 2.7 Inches |
| Part Number | HERNAS-NS106 |
| Model | ns106+5+5 |
More information #ad
7. Yosoo
#adACR122U NFC RFID Contactless Smart Reader & Writer/USB + 5X IC Card ACR122U RFID Smart Card NFC, NFC ACR122U RFID Contactless Smart IC Card Reader Writer
#adThe proximity operating distance of acR122U is up to 5 cm, it is a plug-and-play USB device allowing interoperability with different devices and applications. Application network access control micro-payment NFC mobile tag Public transportation terminals Automatic fare collection Physical access control Customer loyalty Time and attendance Contactless public phones Vending machines.
More information #ad
Acr122u is compliant with both ccid and pc/sc. Furthermore, the acr122u nfc Reader is available in module form, physical access systems and vending machines. Other applications of the acr122u include access control, e-payment, e-ticketing for events and mass transit, toll road fare collection and network authentication. Ccid-compliant pc/sc-compliant read/write speed up to 424 kbps built-in antenna for contactless tag access, with card reading distance of up to 50 mm depending on tag type Supports ISO 14443 Type A and B, and all 4 types of nfc iso/IEC 18092 tags Supports new Ultralight C via pseudo APDUs and Plus SL1 4 Byte UID, felica,, via pseudo APDUS and SL3. With an access speed of up to 424 kbps and a full USB speed of up to 12 Mbps, depending on the type of contactless tag in use.
| Brand | Yosoo #ad |
| Manufacturer | Xuuyuu #ad |
| Part Number | NA |
More information #ad
8. Yosoo Health Gear
#adContactless Smart Card Reader, ACR122U ISO 14443A / B + Free Software in White, NFC Reader Writer, NFC Reader Writer
#adContactless intelligent reader writer: this Contactless Smart Card Reader adopts Integrated antenna for contactless tag access with card reading distance of up to 50 mm depending on the day. Application: this nfc reader supports iso 14443 type a and b, felica and all 4 types of nfc iso / iec 18092 markings; Supports new Ultralight C via pseudo APDUs and Plus SL1 4-byte UID over pseudo APDUS and SL3.
More information #ad
Satisfactory guarantee: we are a customer oriented company that is dedicate to provide best product and fast service, if you have any problems with this product you can free to contact us and we will help solve the problem for you as soon as possible.| Brand | Yosoo Health Gear #ad |
| Manufacturer | Yosoo Health Gear #ad |
| Height | 1.02 Inches |
| Length | 8.19 Inches |
| Width | 3.66 Inches |
| Part Number | Yosoo Health Gear4c8d37zmp0 |
More information #ad
9. CDIYTOOL
#adNFC RFID Card Copier Reader Writer Duplicator, WiFi Full Decode Smart Card RFID NFC Copier IC ID Reader Writer Duplicator, 10pcs ID125khz Cards+10pcs ID125khz Keyfobs+10pcs 13.56mhz IC Key
#adSupport frequency: id-125khz, id-250khz, id-300khz, id-375khz, id-175khz, ID-500KHz etc. Waterproof & Durable.
More information #ad
Casing material: ABS Plastic. Easy to use: wireless network connection for cloud decryption, no computer required, more convenient, easy operation. Premium material: high-quality copper Coil inside. Wifi full decoding: complete decoding function, support cracking IC full encryption/Semi-encryption card.| Brand | CDIYTOOL #ad |
| Manufacturer | Big waves #ad |
| Part Number | 0412-01 |
| Model | 0412-01 |
More information #ad
10. Lexi
#ad125KHz Key fob Copier, RFID Smart Card Reader Writer, 13.56MHz Encrypted Programmer, LEXI RFID NFC Duplicator, USB Interface, with UID/T5577 Writable Key Cards and Software
#adWorking frequency125khz / 13. 56 mhz, support ic / ID dual frequency replication. Obtain the software when you connect this product to a computer, you can find the software on the computer. Led warning light / buzzerthe led reminder light is red in standby mode, the green light is in card reading status, and a built-in buzzer is provided for convenient and effective reminders.
More information #ad
You can also download the software via the link in the "NOTE" section below this product page. Lightweight and easy to useabS flame-retardant material shell, small size and thin, high-quality microchip control inside, fast card reading effect.| Brand | Lexi #ad |
| Manufacturer | LEXI #ad |
| Height | 0.5 Inches |
| Length | 4.3 Inches |
| Weight | 0.31 Pounds |
| Width | 2.7 Inches |
| Part Number | NS106 |
| Model | NS106 |
More information #ad
