Top 9 Febco Pressure Vacuum Breaker – Home Improvement

As an Amazon Associate I earn from qualifying purchases.



Solid Brass Anti-Backflow Valve with Tape, 3/4 Inch GHT Garden Hose Thread Anti-Siphon Hose Bib Valve for Garden Spigot, RV, SUNGATOR 2-Pack Vacuum Breaker Set

SUNGATOR #ad - Drain hole: drain hole is able to drain the remained water in the pipe. Advanced function: break-off screw for permanent attachment; eliminates back-siphonage into water supply; anti-backflow valve for most of standard hose and end valves including hose bibs, outside water faucets, RV, sillcocks, garden spigot, hydrants.

Specifications: 3/4 inch female hose threaded inlet × 3/4 inch male hose threaded outlet; max operating pressure is 125 psi; max operating temperature is 180°F/82°C. Warning :please keep away from the product when turning off the water, remained water will be sprayed out. Package includes: 2 × vacuum breakers, 4 × washers, 1 × Tape About 350" long and 1 × Plastic Box. High quality: durable brass material stays longer; Meets ASSE 1011/CSA B64. 2, meets ansi/nsf 61-9.
ManufacturerSUNGATOR #ad

2. Sunluway


905-212 Bonnet and Poppet Repair kit & 905-052 Check Valve Assembly Repair Kit & Canopy for Febco 765EBV 1" & 1-1/4" 765 Backflow Preventer and Vacuum Breaker

Sunluway #ad - Notice: Don't overtighten. Materialmade of abs and steel, it is lightweight, hard and durable. 905-052 check valve assembly repair kitpart of the backflow protection device to prevent contaminated water from entering the clean water supply system.

Canopy is consturcted from Aluminum alloy with Anodized finish. Applicationall parts work for febco 765ebv 1" & 1-1/4" 765 backflow preventer and vacuum Breaker. Maximum working pressure: 150 psi. 905-212 bonnet and poppet repair kitused to replace the broken Bonnet and Poppet and make your sprinkler system working again. Contains 1*holder, 1*Screw, 1*Disc And 1*Guide. Perfectly replace for febco oem 905-212, 905-052 & 300-089. Satisfaction guarantee if you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty.

Canopy/bell coverplace the canopy on top of the metal screw and tighten the small nut just enough to hold the metal bell on the device and still rotate by hand with some tension. Kit includes bonnet, rubber disc, stem, spring, O-ring, washer, E-ring, poppet. With stable performance and reliable use and longer service life.
BrandSunluway #ad
ManufacturerSunluway #ad



4ALLTECH Bonnet Poppet Repair kit fit for FEBCO 765-1 Replacement Part# 905-212 1" & 1-1/4" Backflow Preventer and Vacuum Breaker Part Number 905212 for FEBCO 765 1" & 1 1/4" Vacuum Valve

4ALLTECH #ad - Two fit for febco's model 765 evb 1" and FVB 1-1/4" vauum pressure breaker valve, vacuum breaker and backflow preventer. Please confirm your part number # 905-212 before place order! please note the 1" and 1-1/4" is not the outer diameter of the bonnet part! the desription of 1" and 1-1/4" is the orginal FEBCO 765 valve model name.

Please do not misunderstanding! Ready-to-go kit, rubber disc, stem, includes bonnet, poppet and oil bag. Instruction: please apply the included grease on both threading of the bonnet part and bronze valve. Two pits on the outer ring of the bonnet part are fitting for large wrench, use proper tool to tighten if needed.

Easy to install, o-ring, e-ring, spring, washer, Free of Lead. Oem factory replacement part for febco. This it is a replacement part for original febco part number 905212 FRK 765-BP 1-1 1/4 Bonnet Poppet Assembly. The outer diameter of this bonnet part is around 2" and it fit for the FEBCO Model 765 1" and 1-1/4" valve.
Brand4ALLTECH #ad
Manufacturer4ALLTECH #ad
Height2.8 Inches
Length2.8 Inches
Width2.8 Inches
Part Number905-212

4. WHK


WHK Hose Bib Backflow Preventer Vacuum Breaker,Garden Hose Check Valve to Connect 3/4 Inch Outdoor Faucet Spigot,Sprinkler,RV,Anti-Siphon,2 Packs

WHK #ad - 100% satisfaction service and package includesyou will receive 2 PCS hose backflow preventer+1 PC Tape+2 additional washers. If you are not completely satisfied our products, we will give you a replacement or a refund. Garden hose backflow preventer material●the material of bib hose backflow preventer is use solid 100% heavy duty brass, safety and duable.

The hose bib vacuum breaker is high temperature ductility and low magnetic permeability. Meets asse 1011/csa B64. 2 and ansi/nsf 61-9 Standard. Garden hose vacuum breaker featurewhk vacuum breaker will prevent unclean water into drinking; Manually drain the faucet and block water from freezing and Anti-siphone. 3/4-inch self draining vacuum, breaker, Male hose thread, Break-off screw for permanent attachment.

Garden hose check valve application condition Max operating pressure is 125 psi; Max operating temperature is 180°F/82°C. Vacuum breaker valve size3/4-inch female hose threaded inlet, sillcocks, wall faucets, 3/4-inch male hose threaded outlet. The ¾-inch thread outlet is apply for most of standard hose and end valves including hose bib, RV water lines and garden hose.
BrandWHK #ad
ManufacturerWOKEN #ad



DEWHEL SM01.125 Vacuum Breaker Adapter Compatible with Arrowhead PK1360 Anti-Siphon Valve Includes Rubber Washer

DEWHEL #ad - Fit for arrowhead pk1360 anti-siphon Valve, Includes Rubber Washer, double protection to prevent water leakage. Sm01. 125 ~ compatible with arrowhead spigots when you can only remove the bottom Part of the Vacuum Breaker or Where the External Thread Diameter of Spigot Measures 1. 17". Using this part, you can convert your arrow anti-siphon hose bib into an ordinary garden hose connection that does not leak. Material: Brass. Internal Diameter of Adapter is 1. 125". In package:1xsm01. 125 vacuum breaker Adapter, 1xRubber Washer.
BrandDEWHEL #ad
ManufacturerDEWHEL #ad

6. Habitech


No Assembly Required, Backflow Preventer, Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Filter, Pressure Regulator

Habitech #ad - Connect your drip irrigation system to your water supply, maintain optimally low flow water pressure, keep out debris with a filter, and prevent backflow all with a single pre-assembled unit. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention.

Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes. 520 to. 620 id inner diameter including Rain Bird and Dig. Jumpstart your drip irrigation installation with this set of essential components for building a maintenance-free drip system. Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit.

Save money and time buying everything you need at once. Senninger 25 psi pressure reducer is checked for accuracy and known worldwide for its reliable performance. Ideal for use with raised garden beds, residential, farm, greenhouse gardening and agricultural watering applications. Don't settle for leaks and blowouts. Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.
BrandHabitech #ad
ManufacturerHabitech #ad
Height1.6 Inches
Length6.5 Inches
Weight0.25 Pounds
Width1.6 Inches
Part Number4336408900

7. Sunluway


Sunluway 905-212 Bonnet and Poppet Repair Kit fit for Febco 765 1" & 1-1/4" Backflow Preventer Breaker and Vacuum Breaker

Sunluway #ad - You will get your sprinkler system working again with very little money and minimal labor. Materialmade of abs and steel, it is Lightweight, hard and durable. With stable performance and reliable use and longer service life.

Satisfaction guarantee if you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty. Two pits on the outer ring of the bonnet part are fitting for large wrench, and when necessary, use suitable tools to tighten them. Applicationfits for febco 765 evb 1" & 1-1/4" Backflow Preventer and Vacuum Breaker, 905-212. A must havebecause of ice formed inside the sprinkler system, the Bonnet & Poppet will break, which will make your PVB is leaking. Easy to installplease apply the grease on both threading of the bonnet part and bronze valve.
BrandSunluway #ad
ManufacturerSunluway #ad

8. Moistenland


Moistenland 2023 Upgraded Pressure Regulator 25 PSI, 3/4" FHT × 3/4“ MHT, Acrylonitrile Butadiene Styrene, Great for Drip Irrigation System 2 Pack, Pressure Reducer Low Flow Valve

Moistenland #ad - This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired.

High-strength abs construction for durability, available with 3/4” female hose thread to fit all standard hose or pipe thread connections. Outlet size: ¾" MHT male hose thread. Moistenland 25 psi preset pressure regulators hose thread are used to reduce and regulate the incoming pressure of a household’s water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA. It may be connected to an automated timer, backflow preventer, or filter, if desired. Inlet size: ¾" fht female hose thread.
BrandMoistenland #ad
ManufacturerMoistenland #ad
Part NumberJYF-02

9. usvehj


Usvehj 905-212 1" & 1-1/4" Bonnet and Poppet Repair kit and 905-052 Check Valve Assembly Repair Kit and 765 ebv Canopy fit for Febco 765 PVB 1" & 1-1/4" Backflow Preventer and Vacuum Breakers

usvehj #ad - The canopy can make it look like a new one. The 905-052 check valve assembly Repair Kit can prevent contaminated water from entering the clean water supply system. With strong durability, corrosion resistance and anti-rust performance. You can replace the bonnet yourself.

Package includes nut, Bonnet Assembly, Poppet Assembly and Check Assembly. We support a 30-day full refund on return and a 12-month warranty. Superior materialmade of high-quality abs material, steel, copper, rubber and aluminum alloy. Installs in your existing brass body, you can reuse the brass hood. It literally takes a few minutes and save your money doing it yourself. 100% satisfaction guaranteewe are committed to providing excellent products and the best service for our customers.

Specific compatibilitythe 905-212 kit, canopy, 905-052 kit and 765 evb canopy are compatible with 765-1 PVB 1" & 1-1/4" Backflow Preventer and Vacuum Breakers. Strong functionthe high-quality bonnet material can protect valve bodies from water leakage and freeze damage. If you are not satisfied with the product, you can simply return it. Better quality allows it to be used for a longer time. You just need screw out the old one and re-screw the new parts in order.
Brandusvehj #ad
Manufacturerusvehj #ad